Your Trusted Source for High-Quality Pvf (pipes, Valves, Fittings) Components

This backwater valve provides waste water backflow protection to fixtures and floor drains. A spigot plug seals the valve and a provided cap covers the sleeve entrance.

Xirtec CPVC high-performance process piping systems are an excellent alternative to common and exotic metal chemical-waste systems. They feature a superior temperature range and resistance to photodegradation, creep stress and oxidation, making them ideal for chemical and industrial applications with the use of acids, alcohols, salts and halogens. Xirtec CPVC has proved to be an excellent piping system for hot corrosive liquids, hot and cold water distribution and similar applications. This Xirtec CPVC Schedule 80 Plain End Pipe comes in a 20' length and is available in pipe sizes from 1/2" to 6" IPS. It is joined by solvent cementing, threading, flanging or grooved joints. NSF listed.

Clear-Guard's fail-safe, fully pressure rated clear containment system allows for easy visual detection of leaks and eliminates the risks associated with piping aggressive chemicals overhead. Pipe available in schedule 40 thickness and 1/2" to 8" sizes.

Repair a section of PVC pipe in your DWV system using the repair coupling to maintain a water-tight joint.

Made to bend a PVC DWV pipe run by 22 1/2 degrees. These elbows feature one hub end and one spigot end that connect to a piping system through solvent welding.

These adapters maintain a water-tight seal when transitioning from a Sewer Hub to a PVC DWV Spigot.

Allows the transition from a PVC DWV system to a smaller spigot end PVC sewer piping system.

Solvent weld this reducer bushing to a fitting socket and smaller size pipe to reduce the size of pipe connecting to a fitting.

Xirtec PVC Pipe Clamps are engineered to support pipe away from the mounting surface making it ideal for use in wash-down areas and corrosive and/or wet location environments. They are able accommodate proper expansion and contraction of pipe and prevent unwanted clamp opening. Providing contractors with installation flexibility, strength and lasting reliability.

Xirtec PVC Pipe Clamps are engineered to support pipe away from the mounting surface making it ideal for use in wash-down areas and corrosive and/or wet location environments. They are able accommodate proper expansion and contraction of pipe and prevent unwanted clamp opening. Providing contractors with installation flexibility, strength and lasting reliability.

Seal off unused MPT fittings or pipe run with the female threaded (FPT) cap.

Join two pieces of different size pipe using socket style reducer couplings and solvent welding techniques.

Solvent weld this reducer bushing to a fitting socket and smaller size pipe to reduce the size of pipe connecting to a fitting.

Permanently seal a fitting by solvent welding the spigot end plug to the hub end of a fitting.

Connect a smaller size pipe at a 90 degree angle to a run of pipe. All joints are solvent welded for a leak-proof connection.

Change the direction of your pipe run by solvent welding the socket end to a pipe or spigot end of a fitting, while the FPT end of the elbow fits into an MPT fitting.

Use the male adapter to go from solvent weld pipe to a female threaded (FPT) connection keeping the same size of pipe and fitting.

Use the male adapter to go from solvent weld pipe to a female threaded (FPT) connection keeping the same size of pipe and fitting.

Used to connect to a smaller MPT fitting, this bushing is solvent welded to a fitting socket allowing it to connect to a larger pipe.

Connect a perpendicular pipe between a run of solvent weld pipe using this tee and solvent welding techniques.

This reducing tee connects a smaller size MPT fitting that runs perpendicular to a run of solvent weld pipe.

Designed to quickly disconnect male threaded (MPT) pipe from fittings for maintenance or replacing/adding filters, pumps, etc. Made using a BUNA O-Ring to create a chemical resistant seal that can operate in a wide temperature range.

Change the direction of your pipe run by 90 degrees, by solvent welding the 90 degree socket elbow to a pipe or spigot end of a fitting.

Blind flanges are rated at 150psi at 73 Degrees F and feature a standard 150lb bolting pattern for ease of use.