Abrasive Cones & Plugs
Products
48 itemsDremel polishing point uses felt as the abrasive material. The polishing point has a length of 1 in.
Dremel polishing point uses rubber as the abrasive material. The polishing point has a length of 1.75 in.
Dremel polishing point uses rubber as the abrasive material. The polishing point has a length of 1.75 in.
Standard Abrasives 708756 tapered cone point uses A/O aluminum oxide AO as the abrasive material. Standard Abrasives incorporates this A/O aluminum oxide AO material into the tapered cone point forming a grit of P120. The tapered cone point has a length of 1 in.
Standard Abrasives 701100 tapered cone point uses A/O aluminum oxide AO as the abrasive material. Standard Abrasives incorporates this A/O aluminum oxide AO material into the tapered cone point forming a grit of P120. The tapered cone point has a length of 2.5 in.
Standard Abrasives 706133 tapered cone point uses A/O aluminum oxide AO as the abrasive material. Standard Abrasives incorporates this A/O aluminum oxide AO material into the tapered cone point forming a grit of P120. The tapered cone point has a length of 1.5 in.
Standard Abrasives 710130 tapered cone point uses A/O aluminum oxide AO as the abrasive material. Standard Abrasives incorporates this A/O aluminum oxide AO material into the tapered cone point forming a grit of P120. The tapered cone point has a length of 2 in.
Standard Abrasives 700613 tapered cone point uses A/O aluminum oxide AO as the abrasive material. Standard Abrasives incorporates this A/O aluminum oxide AO material into the tapered cone point forming a grit of P120. The tapered cone point has a length of 1.5 in.
Standard Abrasives 708559 tapered cone point uses aluminum oxide as the abrasive material. Standard Abrasives incorporates this aluminum oxide material into the tapered cone point forming a grit of P320. The tapered cone point has a length of 1 in.
Weiler Tiger Ceramic abrasive cone uses ceramic as the abrasive material. Weiler incorporates this ceramic material into the abrasive cone forming a grit of 20. The abrasive cone has a length of 2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 18145 RPMs.
Weiler Tiger Zirc abrasive cone uses zirconia alumina as the abrasive material. Weiler incorporates this zirconia alumina material into the abrasive cone forming a grit of 20. The abrasive cone has a length of 1 1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 24190 RPMs.
Weiler Tiger AO abrasive cone uses aluminum oxide as the abrasive material. Weiler incorporates this aluminum oxide material into the abrasive cone forming a grit of 24. The threaded nut attachment allows for easy mounting to the tool or pad. The abrasive cone has a length of 1 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 36290 RPMs.
Weiler Tiger Zirc abrasive cone uses zirconia alumina as the abrasive material. Weiler incorporates this zirconia alumina material into the abrasive cone forming a grit of 20. The abrasive cone has a length of 1 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 36290 RPMs.
Weiler Tiger AO abrasive cone uses aluminum oxide as the abrasive material. Weiler incorporates this aluminum oxide material into the abrasive cone forming a grit of 24. The threaded nut attachment allows for easy mounting to the tool or pad. The abrasive cone has a length of 1 1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 24190 RPMs.
Weiler Tiger AO abrasive cone uses aluminum oxide as the abrasive material. Weiler incorporates this aluminum oxide material into the abrasive cone forming a grit of 24. The threaded nut attachment allows for easy mounting to the tool or pad. The abrasive cone has a length of 1 1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 24190 RPMs.
Weiler Tiger AO abrasive cone uses aluminum oxide as the abrasive material. Weiler incorporates this aluminum oxide material into the abrasive cone forming a grit of 24. The threaded nut attachment allows for easy mounting to the tool or pad. The abrasive cone has a length of 1 1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 24190 RPMs.
Weiler Tiger Zirc abrasive cone uses zirconia alumina as the abrasive material. Weiler incorporates this zirconia alumina material into the abrasive cone forming a grit of 20. The abrasive cone has a length of 1 1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 24190 RPMs.
Weiler Tiger AO abrasive cone uses aluminum oxide as the abrasive material. Weiler incorporates this aluminum oxide material into the abrasive cone forming a grit of 24. The abrasive cone has a length of 1 1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 24190 RPMs.
Weiler Tiger Zirc abrasive cone uses zirconia alumina as the abrasive material. Weiler incorporates this zirconia alumina material into the abrasive cone forming a grit of 20. The abrasive cone has a length of 1 1/2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 24190 RPMs.
Weiler Tiger AO abrasive cone uses aluminum oxide as the abrasive material. Weiler incorporates this aluminum oxide material into the abrasive cone forming a grit of 24. The threaded nut attachment allows for easy mounting to the tool or pad. The abrasive cone has a length of 2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 18145 RPMs.
Weiler Tiger AO abrasive cone uses aluminum oxide as the abrasive material. Weiler incorporates this aluminum oxide material into the abrasive cone forming a grit of 24. The abrasive cone has a length of 2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 18145 RPMs.
Weiler Tiger Zirc abrasive cone uses zirconia alumina as the abrasive material. Weiler incorporates this zirconia alumina material into the abrasive cone forming a grit of 20. The abrasive cone has a length of 2 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 18145 RPMs.
Weiler Tiger AO abrasive plug uses aluminum oxide as the abrasive material. Weiler incorporates this aluminum oxide material into the abrasive plug forming a grit of 24. The threaded nut attachment allows for easy mounting to the tool or pad. The abrasive plug has a length of 2 3/4 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive plug can be run at a maximum speed of 13195 RPMs.
Weiler Tiger Zirc abrasive cone uses zirconia alumina as the abrasive material. Weiler incorporates this zirconia alumina material into the abrasive cone forming a grit of 20. The abrasive cone has a length of 2 3/4 in. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Weiler abrasive cone can be run at a maximum speed of 13195 RPMs.
No part selected
Beautiful analytics to grow smarter
Powerful, self-serve product and growth analytics to help you convert, engage, and retain more users. Trusted by over 4,000 startups.
Share team inboxes
Whether you have a team of 2 or 200, our shared team inboxes keep everyone on the same page and in the loop.
Deliver instant answers
An all-in-one customer service platform that helps you balance everything your customers need to be happy.
Manage your team with reports
Measure what matters with Untitled's easy-to-use reports. You can filter, export, and drilldown on the data in a couple clicks.
Connect with customers
Solve a problem or close a sale in real-time with chat. If no one is available, customers are seamlessly routed to email.
Connect the tools you already use
Explore 100+ integrations that make your day-to-day workflow more efficient and familiar. Plus, our extensive developer tools.
Our people make the difference
We're an extension of your customer service team, and all of our resources are free. Chat to our friendly team 24/7 when you need help.
ASAP Semiconductor’s Certifications and Memberships
The only independent distributor with a
NO CHINA SOURCING Pledge
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
"We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War: Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort".